Project V6KR is VERY close to starting! This weekend I got the new TPS wired in and got the IAT sensor wires ran to be spliced into the MAF. I am using the the IAT from the SC T-bird, the sensor is right before the intake manifold (after intercooler) so the intake charge temp will be more accurate. I got the 02 Mustang CAI to fit with the new intake, it needs to be trimmed, but it will work for now.
Need to start list: Cut and refit plug wires, spark plugs, fill fluids, throttle cable, loop blower to intake plenum, connect fuel lines, A/C delete pulley, finish vacuum lines, o2 sensors and harness extensions and that’s about it…
Keep checking back, first start coming soon!!!
Taken from http://mustangjames.blogspot.com/
